PS640

338.00 € – 629.00 € ( 338.00 € excl. tax /// 405.60 € incl. tax)

All Elsner power supplies are delivering a 29 V bus voltage (640 mA) for the KNX system and 24 V DC supply voltage for 24 V devices (150 mA). They inform about actual bus current, short cuts, over voltage, hours of operating and much more. Optionally they may send this information on the bus, and/or they may be equipped with an USP or IP router interface.

SKU: ps640-fr Category:

Description

All Elsner power supplies

All Elsner power supplies are delivering a 29 V bus voltage (640 mA) for the KNX system and 24 V DC supply voltage for 24 V devices (150 mA). They inform about actual bus current, short cuts, over voltage, hours of operating and much more. Optionally they may send this information on the bus, and/or they may be equipped with an USP or IP router interface.

The Power Supply System KNX PS640 delivers a 29 V bus voltage for the KNX system and 24 V DC supply voltage for 24 V devices.

Special operating conditions such as short circuit, electrical surge, overcharge or excess temperature are recorded and may be read off on the display. The present power discharge is displayed as well. It is possible to reset the connected bus devices directly by means of the key pad.

More info and ETS product database

Functions and Operation

  1. Delivers a 29 V KNX bus voltage (reduced), output current max. 640 mA, short-circuit proof
  2. Delivers 24 V DC (not reduced), output current max. 150 mA
  3. Reset of a line directly on the device
  4. Record of operating hours, overload, external overvoltage, internal overvoltage, short circuit and excess temperature
  5. Display of operating data bus voltage, bus current and temperature of the device
  6. The display may be shown in German, English, Spanish or Dutch
  7. Bus connection for data transfer (e. g. malfunction messages, operating data)
  8. Possibility for reset and diagnostics via the bus

Technical Data

HousingPlastic material
ColourWhite
MountingSnap-on fitting on mounting rails
Protection categoryIP 20
Dimensionsapprox. 123 x 89 x 61 (W x H x D, mm), 7 width units
Weightapprox. 370 g
Ambient temperatureOperation -5…+45 °C, storage -25…+70°C
Ambient air humiditymax. 95% RH, avoid bedewing
Operating voltage230 V AC , 50 Hz
Outputs• KNX bus voltage 29 Volt (reduced),
Output current max. 640 mA, short-circuit proof
• 24 V DC (not reduced), Output current max. 150 mA
• KNX data
Data outputKNX +/- bus terminal plug
Communication objects27

Scope of Delivery

  1. Rail-mounted device with display and keypad
  2. Data sheet with installation instruction and description of parameter setting (German or English)
  3. Product file VD2 (German, English, Spanish) as download

Downloads

ETS file

KNX PS640

Power Supply System

KNX_PS640plus_4c
KNX PS640 – Power Supply System
The Power Supply System KNX PS640+ delivers a 29 V bus voltage for the KNX system and 24 V DC supply voltage for 24 V devices.

Special operating conditions such as short circuit, electrical surge, overcharge or excess temperature are recorded and may be read off on the display. The present power discharge is displayed as well. It is possible to reset the connected bus devices directly by means of the key pad.

In addition all functions can be realised via the bus, too, e. g. the transfer of malfunction messages and operating data and a time/period reset. Malfunction messages are stored by the KNX PS640+.

All information (actual bus current, short cuts, over voltage, hours of operating and much more) are sent on the bus.

More info and ETS product database

Functions and Operation

  1. Delivers a 29 V KNX bus voltage (reduced), output current max. 640 mA, short-circuit proof
  2. Delivers 24 V DC (not reduced), output current max. 150 mA
  3. Reset of a line directly on the device
  4. Record of operating hours, overload, external overvoltage, internal overvoltage, short circuit and excess temperature
  5. Display of operating data bus voltage, bus current and temperature of the device
  6. The display may be shown in German, English, Spanish or Dutch
  7. Bus connection for data transfer (e. g. malfunction messages, operating data)
  8. Possibility for reset and diagnostics via the bus

Technical Data

HousingPlastic material
ColourWhite
MountingSnap-on fitting on mounting rails
Protection categoryIP 20
Dimensionsapprox. 123 x 89 x 61 (W x H x D, mm), 7 width units
Weightapprox. 370 g
Ambient temperatureOperation -5…+45 °C, storage -25…+70°C
Ambient air humiditymax. 95% RH, avoid bedewing
Operating voltage230 V AC , 50 Hz
Outputs• KNX bus voltage 29 Volt (reduced),
Output current max. 640 mA, short-circuit proof
• 24 V DC (not reduced), Output current max. 150 mA
• KNX data
Data outputKNX +/- bus terminal plug
Communication objects27

Scope of Delivery

  1. Rail-mounted device with display and keypad
  2. Data sheet with installation instruction and description of parameter setting (German or English)
  3. Product file VD2 (German, English, Spanish) as download

Downloads

ETS file

KNX PS640+

Power Supply System

KNX_PS640plus_4c
KNX PS640+ – Power Supply System
The Power Supply System KNX PS640-IP combines the central functions of a KNX bus line: Power supply with throttle, IP router and IP interface.

The Power Supply Unit of the KNX PS640-IP delivers a 29 V bus voltage for the KNX system and 24 V DC supply voltage for 24 V devices.

Special operating conditions such as short circuit, electrical surge, overcharge or excess temperature are recorded and may be read off on the display. The present power discharge is displayed as well. It is possible to reset the connected bus devices directly by means of the key pad.

The IP router of the KNX PS640-IP allows for forwarding of telegrams between different lines via a rapid LAN (IP) backbone. The KNX PS640-IP therefore also takes on the function of a line coupler.

In parallel, the KNX PS640-IP can be used as interface for accessing the bus access via IP. Like this, the KNX system can be configured and supervised from any PC in the LAN (Tunneling).

More info and ETS product database

Functions and Operation

  1. Delivers a 29 V KNX bus voltage (reduced), output current max. 640 mA, short-circuit proof
  2. Delivers 24 V DC (not reduced), output current max. 150 mA
  3. Reset of a line directly on the device
  4. Record of operating hours, overload, external overvoltage, internal overvoltage, short circuit and excess temperature
  5. Display of operating data bus voltage, bus current and temperature of the device
  6. The display may be shown in German, English, Spanish or Dutch
  7. Routing: Transfer of KNX data via LAN (rapid backbone)
  8. Line coupler function via LAN
  9. Tunneling: Configuration and supervising of the KNX system from any PC in the LAN

Technical Data

HousingPlastic material
ColourWhite
MountingSnap-on fitting on mounting rails
Protection categoryIP 20
Dimensionsapprox. 123 x 89 x 61 (W x H x D, mm), 7 width units
Weightapprox. 395 g
Ambient temperatureOperation -5…+45 °C, storage -25…+70°C
Ambient air humiditymax. 95% RH, avoid bedewing
Operating voltage230 V AC , 50 Hz
Power consumptionapprox. 28 W (full load)
Outputs• KNX bus voltage 29 Volt (reduced),
Output current max. 640 mA, short-circuit proof
• 24 V DC (not reduced), Output current max. 150 mA
• LAN connector RJ45; 10BaseT (10Mbit/s), Supported
internet protocols: ARP, ICMP, IGMP, UDP/IP and DHCP

Scope of Delivery

  1. Rail-mounted device with display and keypad
  2. Data sheet with installation instruction and description of parameter setting (German or English)
  3. Product file VD2 (German, English, French, Italian) as download

Downloads

ETS file

KNX PS640-IP

Router

Power Supply System

KNX_PS640-IP_4c
KNX PS640-IP – Router – Power Supply System

 

 

Additional information

Weight0.37 kg
Dimensions12 × 9 × 6 cm
Model

basic, plus, IP

Related products